Easy Shape Light Rose - 5 ML

Application tips

• Wash your hands, disinfect them and put on gloves;
• Disinfect the client’s hands and assess the condition of the hands and nails;
• Clean the nail plate, push back the cuticles with a cuticle pusher or a wooden stick;
• File the nail plate with a 100/180 grit buffer or gently with a 180-grit file;
• Clean off the dust with a soft brush;
• Degrease with a traditional Cleaner;
• Use Acid Free Primer or Acid Primer for a more demanding nail plate;
• Place the template;
• Apply a thin layer of base, e.g. Perfect Base or Protein Base, to the natural nail plate and cure in a Multi LED lamp for 30 seconds;
• Apply the first layer of gel to the nail plate and template to create the so-called frame;
• Cure in the lamp for 30 seconds
• Remove the template by squeezing it from the bottom, peel the wings off the finger and remove the template dragging it downwards. 
• Take a small amount of gel and spread it over the entire nail creating the so-called slip layer - do not cure it!
• Take a larger portion of the gel and place it at the apex
• Start spreading the gel around the nail surface by dragging it gently left and right in the so-called smile lines - do not press the brush against the product,
• After building the desired shape of the nail, cure it in the Multi LED lamp for 30-60 seconds;
• Remove the sticky layer with a cotton pad soaked in the Wipe Off Cleaner;
• Prepare the shape and surface of the nail using a 100/180 grit file;
• Smooth the surface with a 100/180 grit buffer;
• Clean the nail with a cotton pad soaked in the Wipe Off Cleaner
• Apply the chosen gel polish colour and cure each layer in the Multi LED lamp for 30 seconds;
• Apply an appropriate top coat, e.g. Wet Look, Tip Top, Super Matte; cure in the Multi LED lamp for 30 seconds.
• If the top coat has a sticky layer, wait about a minute and remove it with a cotton pad soaked in the Shea Super Shine Cleaner. To enhance the shine of the styling, you can finish it off by polishing the nails with a dry cotton pad until you hear a characteristic squeaking sound.
• In the case of tops that do not leave a sticky layer, wait about a minute before applying any care products
•  

Composition

Aliphatic Urethane Acrylate, Isopropylidenediphenyl Bisoxyhydroxypropyl Methacrylate, Triethylene Glycol Dimethacrylate, HEMA, Silica Dimethyl Silylate, Di-HEMA Trimethylhexyl Dicarbamate, Urethane Acrylate, PEG200 Diacrylate, 2-(Methacryloyloxy)ethylsuccinate, Hydroxycyclohexyl Phenyl Ketone, Methyl Benzoylformate, BHT, Diethylene Glycol Monomethylacrylate, Aliphatic Urethane Diacrylate, Ethylhexyl Acrylate, Octocrylene, Pentamethyl Piperidinyl Sesquisebacate, PEG-4 Trimethylolpropane Triacrylate, Zinc Sulfide, p-Hydroxyanisole, Methyl-1,2,2,6,6-pentamethyl-4-piperidyl Sebacate, PEG200 Dimethacrylate, Polyester Resin, Modified Polysiloxane, Ethyl Trimethylbenzoyl Phenylphosphinate, Ethylene Glycol Diacrylate, Hydroquinone, Mica, Hydrogenated Polyisobutene, Phenoxyethanol, Palmitic Acid, Benzoic Acid, CI 77891, CI 77231, CI 77491, CI 77220, CI 73915, CI 73900, CI 15850, CI 77499