Mousse Gel Beige No.1 - 50 G

Application tips

Extension with templates:

1. Wash hands, disinfect, and wear gloves.

2. Assess the condition of the client's hands and nails.

3. Clean the nail plate, push back cuticles with a hoof stick or wooden stick.

4. Mattify the nail plate with a 180-grit file, buffer, or mandrel with a 240-grit cap.

5. Remove dust with a dusting brush.

6. Degrease with Cleaner 1.

7. Apply Acid-Free Primer or Acid Primer for more demanding nail plates.

8. Place the template under the nail.

9. Apply a thin layer of base (e.g. Protein Base or Perfect Base) to the natural nail plate and cure in the MultiLed lamp for 30 seconds.

10. Apply the first layer of gel on the nail plate and template to create the so-called skeleton (cure in the lamp).

11. Apply the second, thicker builder layer of gel, considering the correct structure (apex and upper arch), then cure in the MultiLed lamp for 60 seconds.

12. Remove the template.

13. Wipe off the sticky layer using Cleaner Wipe Off.

14. Shape and refine the surface with a 100/180-grit file.

15. Smooth the surface with a 100/180-grit buffer.

16. Apply the selected Top Coat (e.g. Wet Look, Tip Top, Super Matte) and cure in the MultiLed lamp for 30 seconds.

Strengthening the natural nail plate:

1. Wash hands, disinfect, and wear gloves.

2. Assess the condition of the client's hands and nails.

3. Clean the nail plate, push back cuticles with a hoof stick or wooden stick.

4. Mattify the nail plate with a 180-grit file, buffer, or mandrel with a 240-grit cap.

5. Remove dust with a dusting brush.

6. Degrease with Cleaner 1.

7. Apply Acid-Free Primer or Acid Primer for more demanding nail plates.

8. Apply a thin layer of base (e.g. Protein Base or Perfect Base) to the natural nail plate and cure in the MultiLed lamp for 30 seconds.

9. Apply the first thin layer of gel on the nail plate (cure in the lamp).

10. Apply the second, thicker builder layer of gel, considering the correct structure (apex and upper arch), then cure in the MultiLed lamp for 60 seconds.

11. Wipe off the sticky layer using Cleaner Wipe Off.

12. Shape and refine the surface with a 100/180-grit file.

13. Smooth the surface with a 100/180-grit buffer.

14. Apply the selected Top Coat (e.g. Wet Look, Tip Top, Super Matte) and cure in the MultiLed lamp for 30 seconds.

Composition

Aliphatic Urethane Acrylate, Isopropylidenediphenyl Bisoxyhydroxypropyl Methacrylate, Pentaerythrityl Triacrylate, Hydroxypropyl Methacrylate, Triethylene Glycol Dimethacrylate, Silica Dimethyl Silylate, 2-(Methacryloyloxy)ethylsuccinate, Methyl Benzoylformate, Hydroxycyclohexyl Phenyl Ketone, Isobornyl Methacrylate, Octocrylene, Ethylhexyl Acrylate, Pentamethyl Piperidinyl Sesquisebacate, BHT, Methyl-1,2,2,6,6-pentamethyl-4-piperidyl Sebacate +/- CI 77891, CI 16035, CI 77007, CI 77499

Warnings

For professional use only. Avoid contact with skin. Please read the instructions carefully. Keep out of reach of children. Avoid contact with eyes. In case of eye contact, rinse with plenty of water and seek medical advice. May cause skin and eye irritation. Avoid contact with dust. May cause an allergic reaction.