Nail tips Full Cover Tips Square - 240 PCS

Application tips

1. Wash and disinfect your and your client's hands. Put on gloves. Assess the condition of the client's hands and nails to make sure there are no contraindications to the treatment.
2. Push back the cuticles with a hoof or stick and work them out with a cutter, such as Cuticle 9, 1.
3. Shorten your nails accordingly using a 180/240 or 100/180 gradation file.
4. Use a 100/180 gradation buffer or a mandrel with a 240 gradation overlay to thoroughly mat the plate. You can use a cutter: Diamond II or Diamond III. 
5. Clean the plate of dust with a brush, brush or compressed air.
6. Soak a dust-free swab with Cleaner No. 1 and thoroughly degrease the plate with it.
7. Apply a suitable primer (Acid Free Primer or Acid Primer).
8. Choose the shape of the tips and match the appropriate size to the individual nail. Pay attention to the width of the tip-it should fit exactly to the sides of the natural plate, it should not be too narrow or too wide. 
9. Apply a thin layer of your chosen base, such as Protein Base, and cure in the lamp (30 seconds in a MultiLed lamp).
10. Cover the inner surface of the nail tip at the cuticles with Protein Base and apply it to the nail in such a way that pressing it from the cuticles towards the free edge, move the base along the plate. 
11. Cure the base with the tips in this position in the Multiled lamp 60 seconds.
12. If necessary, you can shorten the nail or reshape the free edge, as well as work out the area around the nail shaft, such as with the Karbid 6 Multicolor cutter.
13. Grind the surface with a 100/180 gradation buffer and clean the dust with a brush or compressed air.
14. If necessary, clean the surface with a cotton swab soaked in Wipe Off Cleaner.
15. Paint your nails with any color to achieve full coverage or make the ornament of your choice. Cure each layer of product for 30 seconds in a MultiLed lamp.
16. Secure the styling with a top, such as Tip Top or Wet Look, and put your hands back in the lamp for 30-60 seconds.
17. Wait a minimum of 60 seconds for the top to cool.
18. If you chose a top with a sticky layer*, remove it with a cotton swab soaked in Cleaner No. 3 - Shea Super Shine Effect.
19. To add even more shine to your nails, you can polish them with a dry cotton ball at the end.

*Top without a sticky layer, you do not need to wipe with Cleaner No. 3 Shea Super Shine Effect. After waiting a minimum of 1 minute, you can apply your chosen Shea Elixir with keratin to the nail shafts.