Stamping plate christmas 01 mini - 1 PCS

Application tips

To apply a chosen design from the stamping plate, begin by preparing the nail surface:

• Hybrid manicure: Apply a matte top coat or buff the surface with a 180/240 grit buffer and cleanse thoroughly with a lint-free wipe soaked in Cleaner No. 1
• Gel manicure: After filing, apply a matte top coat or buff with a 180/240 grit buffer, then clean with Cleaner No. 1.
• Classic protein polish: Wait until the color layer is completely dry.

Clean the selected design on the plate with nail polish remover, Wipe Off Cleaner, or standard Cleaner. The plate is now ready, but you’ll need to work quickly to ensure the design transfers well.

1. Cover the design with stamping polish, applying a slightly thicker layer vertically over the design.
2. Use a scraper, pressing it against the plate and quickly swiping to spread the polish evenly over the design.
3. Using a silicone stamper, pick up the design with a swift motion without pressing the stamper onto the plate.
4. If unwanted parts of the design or extra details are picked up, remove them with sticky tape, a lint roller, or a nail form.
5. Place the prepared design on the nail, pressing lightly, then use a rocking motion to ensure even transfer without lifting.
6. If parts of the design don’t stick completely, press them down gently with your finger, and if the design overlaps the skin, carefully separate it with a wooden stick. Do not remove at this stage to avoid damaging the design on the nail.
7. Once the design is dry, secure it with a top coat, applying gently without pressing the brush, and cure in a lamp.
8. Finally, clean the skin with a nail polish remover or Wipe Off Cleaner.

TIPS:
Never clean the stamper or scraper with Cleaner No. 1, as this could damage their surface and affect stamping quality. The stamper is best cleaned with sticky tape, a lint roller, or as a last resort, a gentle Wipe Off solution.

PRO TIP:
Gently clean the plate with a lint-free wipe soaked in Nail Polish Remover. If stamping gels are used, Wipe Off Cleaner works well. If gel hardens on the plate, place lint-free wipes soaked in Remover over the surface for several minutes, then clean with Wipe Off Cleaner. You can also soak the plate in warm water and carefully remove hardened gel from the details with a wooden stick. Note: excessive scraping with sticks or tools may scratch the plate, impacting design quality.