Aqua Gel - 7 ML

Application tips

1. Wash and disinfect yours and your customers' hands. Put on gloves. Assess the condition of the customer's hands and nails to make sure that there are no contraindications for the treatment.
2. Push the cuticles back using a cuticle pusher or a stick and treat them with e-file bit, e.g. 9, 1.
3. Thoroughly matt the nail plate with a 100/180 grit buffer.
4. Remove the excess nail dust with a soft brush.
5. Dehydrate the nail plate with a dust-free cotton swab and purple Cleaner.
6. Apply the appropriate primer (Acid Free Primer or Acid Primer).
7. Apply one layer of the selected gel polish base and cure in the lamp (30 sec. in Multiled lamp).
8. You can remove the excess dispersion layer with a dry dust-free cotton swab or gel brush.
9. If the nails require a superstructure, choose any building base, e.g. Protein Base or Mineral Base.
10. Apply the selected colour one by one, curing each layer of gel polish in the lamp.
11. Apply Aqua Gel evenly on the cured colour layer. Apply the selected gel polish colour or one of the Nailart products to the wet surface to create the design.
12. Then cure the design in the Multi Led lamp (30-60 sec.).
13. Cover the colour with the selected gel polish top coat and cure with the top 30-60 seconds in the Multi Led lamp.
14. If the selected top coat has a dispersion layer, after curing, wait about 60 seconds before wiping it with Cleaner Super Shine or Shea Super Shine.

Composition