Indigo Stamping Plate 05 - 1 PCS

Application tips

Stamping with lacquer:

• To make a design from the selected stencil from the stamping tin, first prepare the nail surface properly:
  cover the hybrid styling with a matte top coat or matt the surface with a buffer with a gradation of 280 and clean it thoroughly with a cotton swab soaked in Cleaner 1.
• Styling with gel - after filing, it is best to cover with a matte top or matt the surface with a buffer with a gradation of 280 and thoroughly clean it with a cotton swab soaked in Cleaner 1. 
• classic protein varnish - wait carefully until the color layer is completely dry.

Then the pattern selected on the tin should be generously covered with stamp varnish and with a quick, decisive moment scrape off its excess from the tin with a scraper. Immediately after this step, imprint the design from the tin with a stamp and transfer it to the surface of the nail. After a while, when the pattern dries, you can protect it with the top coat of your choice and cure it in a lamp or cover it with a topcoat.

PRO TIP:

• Clean the sheet gently with a cotton swab soaked in Nail Polish Remover. 
• If you are using gels for stamping then Wipe Off will work great. 
• If the gels harden on the surface of the tile, we can try to make a poultice of several minutes with a cotton swab soaked in Remover, and then clean the tile again with Wipe Off Cleaner. 
• We can also soak the tin in warm water and gently use a stick to remove the cured gel from the nooks and crannies. 

Note: scratching the surface too hard with the stick or other tools may cause scratches, which will negatively affect the quality of the reflected designs.